The Rogowski Coil RC-211 is a current transducer, ideal for detecting high currents. Simplicity in installation is the strong point of these devices and allows their use in any type of existing system even where space is limited. The standard version of the Rogowski Coil has an output signal of 100mV / kA but customize versions can be supplied. The Rogowski Coil RC-211 can be used with the multifunction analyzers of the M400 and M900 series (ex. M403-R, M401-RE, M903-RM, M901-RE etc.) or with the MT-RC1 dedicated transducer of the MT series .
Rogowski Coil – internal diameter 211mm
- Accuracy 1%
- 100mV/kA
Data Sheet
User Manual
Catalog
Software
Recommended accessories…
Accessori consigliati
-
E92002
Front panel (96 x 96 mm) network analyzer for three-phase (3-4 wires or ARON) connection
- Three-phase with display
- Accuracy 0,5% of f.s.
- RS485 ModBus RTU Serial interface
- Two alarms outputs
-
ID43001
Digital indicator for direct voltage – 96×48 – 3 digits
- Accuracy: 0,2%
- Input: ± 9.99mV … ± 999V
- Insulation: 2kV
-
IDM3004
Digital indicator for alternating current – 4 DIN Rail modules – 3 digits
- Accuracy: 0,2%
- Input: 999μA … 999A
- Insulation: 2kV
You may also like…
-
RC-243
Rogowski Coil – internal diameter 243mm
- Accuracy 1%
- 100mV/kA
-
M901-RM
Front panel (96×96 mm) multifunction meter, single-phase connection with RS485 ModBus RTU serial interface
- Single-phase with display
- Accuracy: 0,2%
- Input from Rogowski coil
- RS485 ModBus RTU serial interface
- Two alarms outputs
- Touch buttons
