BARGH1 is a 4 digits digital panel indicator (dimensions: 72 x 144 mm BARGRAPH) suitable for reading a direct voltage. Depending on the model (see technical data sheet) it’s possible to read signals from ± 19.99mV up to ± 1999V (from divider). BARGH1 is the ideal solution for any type of system, application or panel where there is a need to display a direct voltage with high precision (Cl. 0,2%) and reliability by applying a control on the measured signal. It’s possible to set a series of useful functions using the front buttons, such as: access code, minimum or maximum alarms, measurement update filter, peak measurements, measurement scaling, etc. It is also equipped with four relay outputs configurable as alarms. The auxiliary power supply of the instrument allows it to be used both in systems powered by mains voltage (115/230 Vac) and in systems powered by low voltage with an extended range power supply 20…60Vac/dc (option).

Range types for models:

BARGH1-01   ± 19.99mV
BARGH1-02   ± 199.9mV
BARGH1-03   ± 1.999V
BARGH1-04   ± 199.9V
BARGH1-05   ± 19.99V
BARGH1-06   ± 600V
BARGH1-DP   ± 1999V (from divider)

Digital indicator for direct voltage – 72×144 BARGRAPH – 4 digits with ALARMS

  • Accuracy: 0,2%
  • Input: ± 19.99mV … ± 1999V
  • Insulation: 2kV

Data Sheet

User Manual

Catalog

Software

Recommended accessories…

Accessori consigliati

  • M1 72144

    IP 54 plumbable splashproof transparent cover – dimensions 72×144

    • Dimensions: 72×144 mm
    • Protection degree: IP54

You may also like…

  • SID72MP1

    Digital indicator for direct voltage – 72×72 – 4 digits with ALARMS

    • Accuracy: 0,2%
    • Input: ± 19.99mV … ± 1999V
    • Insulation: 2kV
  • ID44001

    Digital indicator for direct voltage – 96×48 – 4 digits

    • Accuracy: 0,2%
    • Input: ± 99.99mV … ± 9999V
    • Insulation: 2kV
  • E101P

    DIN rail insulator for analog signals with RS485 ModBus RTU serial interface

    • Accuracy: 0,2% f.s.
    • RS485 ModBus RTU serial interface
    • Analog output (loop powered or load independent)
    • Two digital outputs
    • SD memory card for datalogger
    • Aux. power supply: 18…48 Vac/dc