MT-Pdc is a power transducer for, suitable for D.C. systems, which converts the signal taken from the system into an analog process signal (0 … 5mA – 0..20mA – 4 … 20mA – 0 … 10V etc.) suitable for acquisition through PLC or data management systems. The MT-Pdc transducer is the ideal solution for all types of systems, it’s able to guarantee high insulation (2kV) between input and output and to perform measurements with acquisition times <50 msec (option), high accuracy class (0.5% or 0.2%) and manages signals up to 500V – 10A. It can be supplied with RS485 ModBus RTU serial interface which allows remote monitoring of all measurement and configuration parameters. When supplied with a serial interface, the transducer can be configured using PrTrasd software with which it is possible to set the input range, output range, perform output tests, etc. The auxiliary power supply allows it to be used both in systems powered by mains voltage and in systems powered at 24Vdc by having an 18…60 Vac/dc extended range power supply on board.

DIN rail power transducer for D.C. systems

  • One channel 500V 10A max
  • Accuracy 0,5%
  • RS485 ModBus RTU Serial Interface
  • Analog output
  • Insulation 2kV

Data Sheet

User Manual



Recommended accessories…

Accessori consigliati

  • CM-MT10

    Terminal covers for transducer series

  • PR-1

    Voltage divider

    • Continuous overload: 1,2 Vn
    • Range: 600 … 2000V
  • SHUNT-1

    SHUNT /60mV – /100mV – /150mV DIN Series – mounting on base

    • Accuracy: 0,5%
    • Output signal : 60mV – 100mV – 150mV
    • Range: 1…25 A

You may also like…

  • MT-Vdc

    DIN rail transducer for D.C. voltage – aux. power supply execution

    • One channel 500V max
    • Accuracy 0,5%
    • RS485 ModBus RTU Serial interface
    • Analog output
    • Insulaion 2kV


  • MT-Cdc

    DIN rail transducer for direct current – aux. power supply execution

    • One channel 10A max
    • Accuracy 0,5%
    • RS485 Serial interface
    • Analog output
    • Insulation 2kV
  • E742002AN-1

    Digital indicator with 14 analog inputs – 72×144 – with ALARMS

    • Accuracy: 0,5%
    • Inputs:  0 … ±10V – 0 … ±5V – 0 … ± 60mV
    • Insulation: 2kV
    • RS485 ModBus RTU serial interface
    • Alarms outputs