MT-R is a transducer for linear potentiometer and resistance, which converts the signal into an analog process signal (0 … 5mA – 0..20mA – 4 … 20mA – 0 … 10V etc.) suitable for acquisition through PLC or data management systems. The MT-R transducer is used in many types of systems and applications, it’s able to guarantee high insulation (2kV) between input and output and to perform measurements with acquisition times <50 msec (option) and high accuracy class ( 0.5% or 0.2%). It can be supplied with RS485 ModBus RTU serial interface which allows remote monitoring of all measurement and configuration parameters. The auxiliary power supply allows it to be used both in systems powered by mains voltage and in systems powered at 24Vdc by having an 18…60 Vac/dc extended range power supply on board.

Linear potentiometer transducer with RS485 ModBus RTU serial interface

  • Accuracy 0,5%
  • RS485 ModBus RTU Serial interface
  • Analog output
  • Insulation 2kV

Data Sheet

User Manual

Catalog

Software

Recommended accessories…

Accessori consigliati

  • CM-MT10

    Terminal covers for transducer series

You may also like…

  • E104R-E

    DIN rail I/O module for resistances or potentiometers with RS485 ModBus RTU serial interface and ModBus TCP/IP on Ethernet

    • Accuracy: 0,2% f.s.
    • RS485 ModBus RTU serial interface
    • ModBus TCP/IP on Ethernet
    • Four inputs: resistances or potentiometers
    • Analog output (loop powered or load independent)
    • Two digital outputs
    • SD memory card for datalogger
    • Aux. power supply: 18…48 Vac/dc
  • E102R

    DIN rail I/O module for resistances or potentiometers with RS485 ModBus RTU serial interface

    • Accuracy: 0,2% f.s.
    • RS485 ModBus RTU serial interface
    • Two inputs: resistances or potentiometers
    • Analog output (loop powered or load independent)
    • Two digital outputs
    • SD memory card for datalogger
    • Aux. power supply: 18…48 Vac/dc