SID96MP3-20 … 25 is a 4 digit panel mounting digital indicator (dimensions 96 x 48 mm) suitable for reading a direct current and designed to manage process signals (4 … 20mA – 0 … 20mA – 0 … 10mA etc). SID96MP3-20 … 25 is the useful solution for any type of system, application or panel where there is the need to display a process signal (direct current) with precision (Cl. 0.2%) and reliability for ex. coming from a sensor, from an output of a PLC or from a transducer (ex: MT-UN1, MT-PR1, MT-Pdc, MT-Va etc.) and display the associated engineering quantity (ex: Pa, RPM, kA, W, Bar etc.). It is possible to set a series of useful functions using the frontal buttons, such as: access code, minimum or maximum alarms, measurement update filter, peak measurements, measurement scaling, etc. It’s also equipped with two relay outputs configurable as alarms and two digital inputs that allow you to invert the sign of the measurement, disable the alarms and perform their manual reset. The instrument’s auxiliary power supply allows use both in systems powered by mains voltage (115/230 Vac) and in systems powered at low voltage by having an extended range power supply 20…60Vac/dc (option).

Input types for models:

SID96MP3-20   input:  4…20mA
SID96MP3-22   input:  0…±5mA
SID96MP3-23   input 0…±10mA
SID96MP3-24   input:  0…±20mA
SID96MP3-25   input:  ± xxxmA (according to your needs)

Digital indicator for process signals (direct current) – dimensions 96×48 – 4 digits with ALARMS

  • Accuracy: 0,2%
  • Input: ± 9999
  • Insulation: 2kV

Data Sheet

User Manual



Recommended accessories…

Accessori consigliati

  • M1 9648

    IP 54 plumbable splashproof transparent cover – dimensions 96×48

    • Dimensions: 96×48 mm
    • Protection degree: IP54

You may also like…

  • ID73001-20…25

    Digital indicator for analog process signals (direct voltage) – 72×72 – 3 digits

    • Accuracy: 0,2%
    • Input: ± 999
    • Insulation: 2kV



  • ETPAC100704U3

    HMI touch panel – 4,3″ with ModBus RTU and ModBus TCP/IP interfaces

    • Touch panel
    • RS485 ModBus RTU
    • ModBus TCP/IP su Ethernet
    • Aux. power supply 12…36Vdc
    • Software PLC on board
    • 2 analog inputs – 4 analog outputs
    • 4 digital inputs – 8 digital outputs
  • BARGH3-20…25

    Digital meter for process signals (D.C. curent) – dimensions 72×144 BARGRAPH – 4 digit with ALARMS

    • Accuracy:  0,2%
    • Input:  ± 9999
    • Insulation: 2kV