SIDM4MP3-20 … 25 is a 4 digit rear panel digital indicator (dimensions 4 DIN rail modules) suitable for reading a direct current and designed to manage process signals (4 … 20mA – 0 … 20mA – 0 … 10mA etc). SIDM4MP3-20 … 25 is the useful solution for any type of system, application or panel where there is the need to display a process signal (direct current) with precision (Cl. 0.2%) and reliability for ex. coming from a sensor, from an output of a PLC or from a transducer (ex: MT-UN1, MT-PR1, MT-Pdc, MT-Va etc.) and display the associated engineering quantity (ex: Pa, RPM, kA, W, Bar etc.). It is possible to set a series of useful functions using the frontal buttons, such as: access code, minimum or maximum alarms, measurement update filter, peak measurements, measurement scaling, etc. It’s also equipped with two relay outputs configurable as alarms and two digital inputs that allow you to invert the sign of the measurement, disable the alarms and perform their manual reset. The instrument’s auxiliary power supply allows use both in systems powered by mains voltage (115/230 Vac) and in systems powered at low voltage by having an extended range power supply 12 … 60 Vac – 12 … 20…60Vac/dc (option).

Input types for models:

SIDM4MP3-20   input:  4…20mA
SIDM4MP3-22   input:  0…±5mA
SIDM4MP3-23   input 0…±10mA
SIDM4MP3-24   input:  0…±20mA
SIDM4MP3-25   input:  ± xxxmA (according to your needs)

Digital indicator for process signals (direct current) – dimensions 4 mod. – 4 digits with ALARMS

  • Accuracy: 0,2%
  • Input: ± 9999
  • Insulation: 2kV

Data Sheet

User Manual

Catalog

Software

Recommended accessories…

Accessori consigliati

  • M1 7272

    IP 54 plumbable splashproof transparent cover – dimensions 72×72

    • Dimensions: 72×72 mm
    • Protection degree: IP54
  • MT-S3

    Summing for three-channel process signals with RS485 ModBus RTU serial interface

    • Three analog signals
    • Accuracy 0,5%
    • RS485 ModBus RTU Serial Interface
    • Analog output
    • Configurable inputs range

You may also like…

  • SIDM4MP3

    Digital indicator for direct current – 4 DIN MODULES- 4 digits with ALARMS

    • Accuracy: 0,2%
    • Input: ± 199,9μA … ± 1999A
    • Insulation: 2kV
  • E742002AN-3

    Digital indicator with 14 analog inputs – 72×144 – with ALARMS

    • Accuracy: 0,5%
    • Inputs: 0 … ±20mA – 4 … 20mA
    • Insulation: 2kV
    • RS485 ModBus RTU serial interface
    • Alarms outputs
  • BARGH3-20…25

    Digital meter for process signals (D.C. curent) – dimensions 72×144 BARGRAPH – 4 digit with ALARMS

    • Accuracy:  0,2%
    • Input:  ± 9999
    • Insulation: 2kV