SID8MP-P is an 8 digit digital panel indicator (dimensions: 96 x 48 mm) suitable for reading a resistance measurement from a potentiometer (1 … 100kΩ). SID8MP-P is the useful solution for any type of system, application or panel where there is the need to display a resistance signal from a potentiometer or an output resistive sensor with high accuracy (Cl. 0,1%). A series of useful functions are available and settable using the front buttons, such as: access code, minimum or maximum alarms, measurement update filter, peak measurements, measurement scaling, etc. It is also equipped with four configurable relay alarms, a configurable analogue output, an RS485 ModBus RTU serial interface and an output to power the sensors. It can be supplied with one or two input channels. The instrument’s auxiliary power supply allows use both in systems powered by mains voltage (115/230 Vac) and in systems powered at low voltage by having an extended range power supply 20…60Vac/dc (option).
Inputs types for models:
SID8MP-P Input 1: 1…100kΩ
SID8MP-P2 Input 1: 1…100kΩ Input 2: 1…100kΩ
Digital indicator for high precision potentiometer measurements – dimensions 96×48 – 8 digits with ALARMS
- Accuracy: 0,1%
- Input: 99999999
- Insulation: 2kV
- RS485 ModBus RTU serial interface
- Analog output
Data Sheet
User Manual
Catalog
Software
Recommended accessories…
Accessori consigliati
-
E-CONNECT
Gateway RS485 ModBus RTU – ModBus ModBus TCP/IP
- RS485 ModBus RTU Serial interface
- ModBus TCP/IP on Ethernet
- Aux. power supply: 18…48Vac/dc
-
M1 9648
IP 54 plumbable splashproof transparent cover – dimensions 96×48
- Dimensions: 96×48 mm
- Protection degree: IP54
-
MT232485
RS232 – RS485 signal converter
- RS485 serial Interface
- RS232 serial interface
- Aux. power supply: 115/230Vac or 20…60Vac/dc
You may also like…
-
SID98MP-P
Digital indicator for high precision potentiometer measurements – dimensions 96×96 – 8 digits with ALARMS
- Accuracy: 0,1%
- Input: 99999999
- Insulation: 2kV
- RS485 ModBus RTU serial interface
- Analog output
-
SID96MP5
Digital indicator for resistance measurement – dimensions 96×48- 4 digits with ALLARMI
- Accuracy: 0,2%
- Input: 19.99Ω … 1.999MΩ
- Insulation: 2kV
-
E101U
DIN rail I/O universal module with RS485 ModBus RTU serial interface
- Accuracy: 0,2% f.s.
- RS485 ModBus RTU serial interface
- A configurable input: analog signal – temperature sensor – resistance
- Analog output (loop powered or load independent)
- Two digital outputs
- SD memory card for datalogger
- Aux. power supply: 18…48 Vac/dc
