SID96MP5 is a 4 digit panel mounting digital indicator (dimensions 96x48mm) suitable for reading a resistance measurement. Depending on the model (see technical data sheet) it is possible to read signals from 19.99Ω up to 19.99MΩ. SID96MP5 is the useful solution for any type of system, application or switchboard where there is the need to display a tachometric frequency measurement with high precision (Cl. 0.2%) and reliability by applying a control on the measured signal. It’s possible to set a series of useful functions using the frontal buttons, such as: access code, minimum or maximum alarms, measurement update filter, peak measurements, measurement scaling, etc. It’s also equipped with two relay outputs configurable as alarms and two digital inputs that allow you to invert the sign of the measurement, disable the alarms and perform their manual reset. The instrument’s auxiliary power supply allows use both in systems powered by mains voltage (115/230 Vac) and in systems powered at low voltage by having an extended range power supply 20…60Vac/dc (option).

Input types for models:

SID96MP5-01    19.99Ω
SID96MP5-02    199.9Ω
SID96MP5-03    1.999kΩ
SID96MP5-04    19.99kΩ
SID96MP5-05    199.9Ω
SID96MP5-06    1.999MΩ

Digital indicator for resistance measurement – dimensions 96×48- 4 digits with  ALLARMI

  • Accuracy: 0,2%
  • Input: 19.99Ω …  1.999MΩ
  • Insulation: 2kV

Data Sheet

User Manual

Catalog

Software

Recommended accessories…

Accessori consigliati

  • M1 9648

    IP 54 plumbable splashproof transparent cover – dimensions 96×48

    • Dimensions: 96×48 mm
    • Protection degree: IP54

You may also like…

  • SID72MP5

    Digital indicator for resistance measurement – dimensions 72×72 – 4 digits with  ALLARMI

    • Accuracy: 0,2%
    • Input:19.99Ω …  1.999MΩ
    • Insulation: 2kV
  • E102R

    DIN rail I/O module for resistances or potentiometers with RS485 ModBus RTU serial interface

    • Accuracy: 0,2% f.s.
    • RS485 ModBus RTU serial interface
    • Two inputs: resistances or potentiometers
    • Analog output (loop powered or load independent)
    • Two digital outputs
    • SD memory card for datalogger
    • Aux. power supply: 18…48 Vac/dc

     

  • BARGH5

    Digital meter for resistance measurement – dimensions 72×144 BARGRAPH – 4 digit with ALARMS

    • Accuracy:  0,5%
    • Input: 19.99Ω …  1.999MΩ
    • Insulation: 2kV