E48WM is a 90° analog panel indicator (dimensions: 48 x 48 mm) suitable for reading a power in a DC. system. E48WM is the ideal solution for any type of system, application or panel where there is a need to display a D.C. power signal with precision and reliability. It is supplied with an accessory instrument (4 DIN models) to carry out the measurement. The instrument inputs are: 100 – 115 – 230 – 400 V from divider xx / 100V and 1 – 5 A from SHUNT xxA / 60mV. It’s possible to change the scale to adapt it to any type of system. The instrument will be supplied with a scale made according to your display needs. It’s also possible to apply red, or any color, marks on the scale by highlighting the need scale points.
Analog wattmeter for D.C. signals – 48×48 with accessory – 4 wires THREE-PHASE connection
- Accuracy: 1,5%
- Inputs: 100V … from divider xx/ 100V – 1A … from SHUNT xx/60mV
- Scale: 90°
Data Sheet
User Manual
Catalog
Software
Recommended accessories…
You may also like…
-
MT-Pdc
DIN rail power transducer for D.C. systems
- One channel 500V 10A max
- Accuracy 0,5%
- RS485 ModBus RTU Serial Interface
- Analog output
- Insulation 2kV
-
E96WM
Analog wattmeter for D.C. signals – 96×96 with accessory – 4 wires THREE-PHASE connection
- Accuracy: 1,5%
- Inputs: 100V … from divider xx/ 100V – 1A … from SHUNT xxA/60mV
- Scale: 90°
-
E72WM
Analog wattmeter for D.C. signals – 72×72 with accessory – 4 wires THREE-PHASE connection
- Accuracy: 1,5%
- Inputs: 100V … from divider xx/ 100V – 1A … from SHUNT xxA/60mV
- Scale: 90°
