ESR 20.3 is a measuring current transformer of the 4000 Series that allows you to measure the primary current in the system (from 50 to 250A) and bring it to a value of 5A or 1A suitable to be read by measuring instruments such as digital and analog indicators and ESAM transducers (ex. ID3004-TA, MI96C, MT-Ca, MT-C, MT-PA1 etc.). The ESR 20.3 transformer is the ideal solution for your system and guarantees an accuracy class of 1% or 3%, a FS5 safety factor and an insulation class E. The test voltage is 3kV for 1 ‘ and is built according to EN 60044 / 1-2, IEC 61869/1 + 2.

Cable or bus bar current transformer

  • Accuracy: 1% o 3%
  • Cable dimension: 21 mm
  • Range: 50 … 250A

Data Sheet

User Manual

Catalog

Software

Recommended accessories…

You may also like…

  • M403

    DIN RAIL multifunction meter, three-phase (3 – 4 wires or ARON) connection

     

     

    • Three-phase with display
    • Accuracy: 0,2% f.s.
    • Two alarms outputs

     

     

     

  • E2002

    Rear panel network analyzer for three-phase (3-4 wires or ARON) connection

    • Three-phase with display
    • Accuracy 0,5% of f.s.
    • RS485 ModBus RTU Serial interface
    • Two alarms outputs
  • E101A

    Single-phase network analyzer for DIN rail with RS485 ModBus RTU serial interface and analog outputs

     

    • Single-phase 10A
    • Accuracy 0,2% of f.s.
    • RS485 ModBus RTU serial interface
    • Analog output (loop powered or load independent)
    • Two digital outputs
    • SD memory card for datalogger
    • Aux. power supply: 18…48 Vac/dc