M401-RM is a DIN RAIL multifunction analyzer suitable for single phase connection with reading by Rogowski coil (100mV/kA). It’s equipped with an LCD display capable of guaranteeing an excellent visualization of the parameters in all needs of use, easy to configure and allows the customization of 9 pages with the needed variables to display, if you want, only what you need . It is equipped with two digital outputs which can be used as alarm or pulse outputs (for energy) and a RS485 ModBus RTU serial interface which allows remote monitoring of all measurement and configuration parameters. M401-RM is the ideal instrument for displaying all electric parameters of a single-phase line (voltages, currents, frequency, active – reactive – apparent powers, energies, phase angle, etc.) and in addition to RMS measurements it also provides the fundamental measurements (according to the IEEE 1459-10 standards).

DIN RAIL multifunction meter, single-phase connection with RS485 ModBus RTU serial interface

 

  • Single-phase with display
  • Accuracy: 0,2%
  • Input from Rogowski coil
  • RS485 ModBus RTU serial interface
  • Two alarms outputs

Data Sheet

User Manual

Catalog

Software

Recommended accessories…

Accessori consigliati

  • E-CONNECT

    Gateway RS485 ModBus RTU – ModBus ModBus TCP/IP

    • RS485 ModBus RTU Serial interface
    • ModBus TCP/IP on Ethernet
    • Aux. power supply: 18…48Vac/dc

     

  • MT232485

    RS232 – RS485 signal converter

    • RS485 serial Interface
    • RS232 serial interface
    • Aux. power supply: 115/230Vac or 20…60Vac/dc

You may also like…

  • M901-RM

    Front panel (96×96 mm) multifunction meter, single-phase connection with RS485 ModBus RTU serial interface

    • Single-phase with display
    • Accuracy: 0,2%
    • Input from Rogowski coil
    • RS485 ModBus RTU serial interface
    • Two alarms outputs
    • Touch buttons
  • M401-RBL

    DIN RAIL multifunction meter, single-phase connection with RS485 ModBus RTU serial interface and ModBus TCP/IP Ethernet interface

    • Single-phase without display
    • Accuracy: 0,2%
    • Input from Rogowski coil
    • RS485 ModBus RTU serial interface
    • ModBus TCP/IP on Ethernet
    • Two alarms outputs

     

  • M401-E

    DIN RAIL multifunction meter, single-phase connection with RS485 ModBus RTU serial interface and ModBus TCP/IP Ethernet interface

    • Single-phase with display
    • Accuracy 0,2% f.s.
    • RS485 ModBus RTU serial interface
    • ModBus TCP/IP on Ethernet
    • Two alarms outputs