M401 is a DIN RAIL multifunction analyzer suitable for single phase connection. It’s self-powered (from the measurement signal) and has a current input capable of measuring from 0.05 up to 63 A without the aid of external current transformers. However, it is possible to set CT and VT ratios at will for higher currents and voltages. It is equipped with an LCD display capable of guaranteeing an excellent visualization of the parameters in all needs of use, easy to configure and allows the customization of 9 pages with the needed variables to display, if you want, only what you need . It is equipped with two digital outputs which can be used as alarm or pulse outputs (for energy). M401 is the ideal instrument for displaying all electric parameters of a single-phase line (voltages, currents, frequency, active – reactive – apparent powers, energies, phase angle, etc.) and in addition to RMS measurements it also provides the fundamental measurements (according to the IEEE 1459-10 standards).

DIN RAIL multifunction meter, single-phase connection

 

 

  • Single-phase with display
  • Accuracy 0,2% f.s.
  • Two alarms outputs

 

Data Sheet

User Manual

Catalog

Software

Recommended accessories…

Accessori consigliati

  • ESK 31.3

    Cable or bus bar current transformer

    • Accuracy: 1% o 0,5%
    • Cable dimension: 26 mm
    • Bus bar dimension: 30 x 10 mm
    • Range: 50 … 400A
  • ESK 41.4

    Cable or bus bar current transformer

    • Accuracy: 0,5%
    • Cable dimension: 32 mm
    • Bus bar dimension: 40 x 10 mm
    • Range: 250 … 800A
  • ESR 20.3

    Cable or bus bar current transformer

    • Accuracy: 1% o 3%
    • Cable dimension: 21 mm
    • Range: 50 … 250A

You may also like…

  • M901

    Front panel (96×96 mm) multifunction meter, single-phase connection

     

    • Single-phase with display
    • Accuracy 0,2% f.s.
    • Two alarms outputs
    • Touch buttons

     

  • M401-BL

    DIN RAIL multifunction meter, single-phase connection with RS485 ModBus RTU serial interface and ModBus TCP/IP Ethernet interface

    • Single-phase without display
    • Accuracy 0,2% f.s.
    • RS485 ModBus RTU serial interface
    • ModBus TCP/IP on Ethernet
    • Two alarms outputs
  • E2001

    Rear panel network analyzer for three-phase (3-4 wires or ARON) connection

    • Three-phase with display
    • Accuracy 0,5% of f.s.