The Rogowski Coil RC-179 is a current transducer, ideal for detecting high currents. Simplicity in installation is the strong point of these devices and allows their use in any type of existing system even where space is limited. The standard version of the Rogowski Coil has an output signal of 100mV / kA but customize versions can be supplied. The Rogowski Coil RC-179 can be used with the multifunction analyzers of the M400 and M900 series (ex. M403-R, M401-RE, M903-RM, M901-RE etc.) or with the MT-RC1 dedicated transducer of the MT series .

Rogowski Coil – internal diameter 179mm

  • Accuracy 1%
  • 100mV/kA

Data Sheet

User Manual

Catalog

Software

Recommended accessories…

Accessori consigliati

  • E1100

    High accuracy rear panel network analyzer, three-phase (3-4 wires or ARON) connection

     

    • Three-phase 3-4 eires or ARON
    • Accuracy 0,2% of reading (from 5 to 100% of f.s.)
    • RS485 ModBus serial interface
    • Harmonic analysis up to 64° harmonic

     

  • ID33002

    Digital indicator for alternating voltage – 72×36 – 3 digits

    • Accuracy:  0,5%
    • Input:  99.9mV … 999V
    • Insulation: 2kV
  • ID43003

    Digital indicator for direct current – 96×48 – 3 digits

    • Accuracy: 0,2%
    • Input:  ± 99.9μA … ± 999A
    • Insulation: 2kV

You may also like…

  • RC-243

    Rogowski Coil – internal diameter 243mm

    • Accuracy 1%
    • 100mV/kA
  • RC-211

    Rogowski Coil – internal diameter 211mm

    • Accuracy 1%
    • 100mV/kA
  • M901-M

    Front panel (96×96 mm) multifunction meter, single-phase connection with RS485 ModBus RTU serial interface

    • Single-phase with display
    • Accuracy 0,2% f.s.
    • RS485 ModBus RTU serial interface
    • Two alarms outputs
    • Touch buttons