SID72MP8 is a 4 digit panel mounting indicator (dimensions 72 x 72 mm) suitable for reading a tachometric frequency. Depending on the model (see technical data sheet) it is possible to read signals from 199.9 rpm up to 1999 rpm. SID72MP8 is the useful solution for any type of system, application or switchboard where there is the need to display a tachometric frequency measurement with high accuracy (Cl. 0.5%) and reliability by applying a control on the measured signal. It’s possible to set a series of useful functions using the frontal buttons, such as: access code, minimum or maximum alarms, measurement update filter, peak measurements, measurement scaling, etc. It’s also equipped with two relay outputs configurable as alarms and two digital inputs that allow you to invert the sign of the measurement, disable the alarms and perform their manual reset. The instrument’s auxiliary power supply allows use both in systems powered by mains voltage (115/230 Vac) and in systems powered at low voltage by having an extended range power supply 20…60Vac/dc (option).

Input types for models:

SID72MP8-01    199,9 rpm
SID72MP8-02    1999 rpm

Digital indicator for tachometric frequency – dimensions 72×72 – 4 digits with  ALLARMI

  • Accuracy: 0,5%
  • Input:  199,9 rpm…1999 rpm
  • Insulation: 2kV

Data Sheet

User Manual

Catalog

Software

Recommended accessories…

You may also like…

  • SIDM4MP8

    Digital indicator for tachometric frequency – dimensions 4 mod.- 4 digits with  ALLARMI

    • Accuracy: 0,5%
    • Input:  199,9 rpm…1999 rpm
    • Insulation: 2kV
  • IDC806

    Universal front panel counter

    • One chanel from NAMUR, PNP, NPN, Push-pull, contact, ENCODER
    • Accuracy 0,5%
    • Two RS485 ModBus RTU Serialinterfaces
    • Analog output
    • 4 configurable relays outputs
  • E106D

    DIN rail I/O module for digital signals with RS485 ModBus RTU serial interface

    • Accuracy: 0,2% f.s.
    • RS485 ModBus RTU serial interface
    • 6 inputs: NPN – PNP – Namur – Pulses – Hall sensors – Encoder
    • Analog output (loop powered or load independent)
    • Two digital outputs
    • SD memory card for datalogger
    • Aux. power supply: 18…48 Vac/dc