SID98MP-RTD is an 8 digit digital panel indicator (dimensions: 96 x 96 mm) suitable for reading a Pt100 thermoresistance measurement. SID98MP-RTD is the useful solution for any type of system, application or panel where there is the need to display a temperature signal from a Pt100 sensor with high accuracy (Cl. 0,1%). A series of useful functions are available and settable using the front buttons, such as: access code, minimum or maximum alarms, measurement update filter, peak measurements, measurement scaling, etc. It is also equipped with four configurable relay alarms, a configurable analogue output, an RS485 ModBus RTU serial interface and an output to power the sensors. It can be supplied with one or two input channels. The instrument’s auxiliary power supply allows use both in systems powered by mains voltage (115/230 Vac) and in systems powered at low voltage by having an extended range power supply 20…60Vac/dc (option).
Inputs types for models:
SID98MP-RTD Pt100
Digital indicator for high precision Pt100 measurements – dimensions 96×96 – 8 digits with ALARMS
- Accuracy: 0,1%
- Input: 99999999
- Insulation: 2kV
- RS485 ModBus RTU serial interface
- Analog output
Data Sheet
User Manual
Catalog
Software
Recommended accessories…
Accessori consigliati
-
E-CONNECT
Gateway RS485 ModBus RTU – ModBus ModBus TCP/IP
- RS485 ModBus RTU Serial interface
- ModBus TCP/IP on Ethernet
- Aux. power supply: 18…48Vac/dc
-
M1 9696
IP 54 plumbable splashproof transparent cover – dimensions96x96
- Dimensions: 96×96 mm
- Protection degree: IP54
-
MT232485
RS232 – RS485 signal converter
- RS485 serial Interface
- RS232 serial interface
- Aux. power supply: 115/230Vac or 20…60Vac/dc
You may also like…
-
SID96MP7
Digital indicator for temperature measurement – dimensions 96×48- 4 digits with ALLARMI
- Accuracy: 0,5%
- Input: -60 … +600°C
- Insulation: 2kV
-
SID8MP-RTD
Digital indicator for high precision Pt100 measurements – dimensions 96×48 – 8 digits with ALARMS
- Accuracy: 0,1%
- Input: 99999999
- Insulation: 2kV
- RS485 ModBus RTU serial interface
- Analog output
-
E101U-2E
DIN rail I/O universal module with RS485 ModBus RTU serial interface and ModBus TCP/IP on Ethernet
- Accuracy: 0,2% f.s.
- RS485 ModBus RTU serial interface
- ModBus TCP/IP on Ethernet
- A configurable input: analog signal – temperature sensor – resistance
- Two analog outputs (loop powered or load independent)
- Two digital outputs
- SD memory card for datalogger
- Aux. power supply: 18…48 Vac/dc
