SID98MP-TC is an 8 digit digital panel indicator (dimensions: 96 x 96 mm) suitable for reading a thermocouple measurement. SID98MP-TC is the useful solution for any type of system, application or panel where there is the need to display a temperature signal from a thermocouple sensor with high accuracy (Cl. 0,1%). A series of useful functions are available and settable using the front buttons, such as: access code, minimum or maximum alarms, measurement update filter, peak measurements, measurement scaling, etc. It is also equipped with four configurable relay alarms, a configurable analogue output, an RS485 ModBus RTU serial interface and an output to power the sensors. It can be supplied with one or two input channels. The instrument’s auxiliary power supply allows use both in systems powered by mains voltage (115/230 Vac) and in systems powered at low voltage by having an extended range power supply 20…60Vac/dc (option).
Inputs types for models:
SID98MP-TC J, K, N, B, E, R, S, T
Digital indicator for high precision thermocouple measurements – dimensions 96×96 – 8 digits with ALARMS
- Accuracy: 0,1%
- Input: 99999999
- Insulation: 2kV
- RS485 ModBus RTU serial interface
- Analog output
Data Sheet
User Manual
Catalog
Software
Recommended accessories…
Accessori consigliati
-
E-CONNECT
Gateway RS485 ModBus RTU – ModBus ModBus TCP/IP
- RS485 ModBus RTU Serial interface
- ModBus TCP/IP on Ethernet
- Aux. power supply: 18…48Vac/dc
-
M1 9696
IP 54 plumbable splashproof transparent cover – dimensions96x96
- Dimensions: 96×96 mm
- Protection degree: IP54
-
MT232485
RS232 – RS485 signal converter
- RS485 serial Interface
- RS232 serial interface
- Aux. power supply: 115/230Vac or 20…60Vac/dc
You may also like…
-
SID8MP-TC
Digital indicator for high precision thermocouple measurements – dimensions 96×48 – 8 digits with ALARMS
- Accuracy: 0,1%
- Input: 99999999
- Insulation: 2kV
- RS485 ModBus RTU serial interface
- Analog output
-
E102TCid
DIN rail thermoregulator for thermocouples with RS485 ModBus RTU serial interface
- Accuracy: 0,2% f.s.
- RS485 ModBus RTU serial interface
- Two inputs from thermocouples: types J – K – R – S – T – B – E – N
- Analog output with PID control
- Two digital outputs
- SD memory card for datalogger
- Aux. power supply: 18…48 Vac/dc
-
E102TC
DIN rail I/O module for thermocouple with RS485 ModBus RTU serial interface
- Accuracy: 0,2% f.s.
- RS485 ModBus RTU serial interface
- Two thermocouple inputs: J – K – R – S – T – B – E – N
- Analog output (loop powered or load independent)
- Two digital outputs
- SD memory card for datalogger
- Aux. power supply: 18…48 Vac/dc
