SIDM4MP5 is a 4 digit rear panel digital indicator (dimensions 4 DIN rail modules) suitable for reading a resistance. Depending on the model (see technical data sheet) it is possible to read signals from 19.99Ω up to 19.99MΩ. SIDM4MP5 is the useful solution for any type of system, application or switchboard where there is the need to display a temperature measurement with high accuracy (Cl. 0.2%) and reliability by applying a control on the measured signal. It’s possible to set a series of useful functions using the frontal buttons, such as: access code, minimum or maximum alarms, measurement update filter, peak measurements, measurement scaling, etc. It’s also equipped with two relay outputs configurable as alarms and two digital inputs that allow you to invert the sign of the measurement, disable the alarms and perform their manual reset. The instrument’s auxiliary power supply allows use both in systems powered by mains voltage (115/230 Vac) and in systems powered at low voltage by having an extended range power supply 20…60Vac/dc (option).

Input types for models:

SIDM4MP5-01    19.99Ω
SIDM4MP5-02    199.9Ω
SIDM4MP5-03    1.999kΩ
SIDM4MP5-04    19.99kΩ
SIDM4MP5-05    199.9Ω
SIDM4MP5-06    1.999MΩ

Digital indicator for resistance measurement – dimensions 4 mod.- 4 digits with  ALLARMI

  • Accuracy: 0,2%
  • Input:19.99Ω …  1.999MΩ
  • Insulation: 2kV

Data Sheet

User Manual

Catalog

Software

Recommended accessories…

You may also like…

  • SID72MP5

    Digital indicator for resistance measurement – dimensions 72×72 – 4 digits with  ALLARMI

    • Accuracy: 0,2%
    • Input:19.99Ω …  1.999MΩ
    • Insulation: 2kV
  • E102R

    DIN rail I/O module for resistances or potentiometers with RS485 ModBus RTU serial interface

    • Accuracy: 0,2% f.s.
    • RS485 ModBus RTU serial interface
    • Two inputs: resistances or potentiometers
    • Analog output (loop powered or load independent)
    • Two digital outputs
    • SD memory card for datalogger
    • Aux. power supply: 18…48 Vac/dc

     

  • BARGH5

    Digital meter for resistance measurement – dimensions 72×144 BARGRAPH – 4 digit with ALARMS

    • Accuracy:  0,5%
    • Input: 19.99Ω …  1.999MΩ
    • Insulation: 2kV