ID34008 is a 4 digits digital panel indicator (dimensions: 72 x 36 mm) suitable for reading a tachometric frequency. Depending on the model (see data sheet) it’s possible to read signals from 9.999 RPM up to  9999 RPM. ID34008 is the ideal solution for any type of system, application or panel where there is a need to display a tachometric frequency measure with precision (accuracy class 0,2%) and reliability. The ESAM digital indicators allow you to set a series of useful functions such as: arbitrary scaling of the measurement, sign suppression, hold function, alternative scaling, decimal point position, etc. The instrument’s auxiliary power supply allows it to be used both in systems powered by mains voltage, thanks to an extended range power supply 60 … 265Vac / 80 … 300Vdc, and in systems powered at low voltage by having a extended range 12 … 60 Vac – 12 … 80Vdc (option).

Range types for models:

ID34008-01    9.999 RPM
ID34008-02    99.99 RPM
ID34008-03    9999 RPM

Digital indicator for tachometric frequency – 72×36 – 4 digits

  • Accuracy: 0,2%
  • Input: 9.999 RPM… 9999 RPM
  • Insulation: 2kV

Data Sheet

User Manual

Catalog

Software

Recommended accessories…

Accessori consigliati

  • E101U-E

    DIN rail I/O universal module with RS485 ModBus RTU serial interface and ModBus TCP/IP on Ethernet

    • Accuracy: 0,2% f.s.
    • RS485 ModBus RTU serial interface
    • ModBus TCP/IP on Ethernet
    • A configurable input: analog signal – temperature sensor – resistance
    • Analog output (loop powered or load independent)
    • Two digital outputs
    • SD memory card for datalogger
    • Aux. power supply: 18…48 Vac/dc
  • E106D

    DIN rail I/O module for digital signals with RS485 ModBus RTU serial interface

    • Accuracy: 0,2% f.s.
    • RS485 ModBus RTU serial interface
    • 6 inputs: NPN – PNP – Namur – Pulses – Hall sensors – Encoder
    • Analog output (loop powered or load independent)
    • Two digital outputs
    • SD memory card for datalogger
    • Aux. power supply: 18…48 Vac/dc

     

  • MT-FT

    DIN rail frequency transducer for alternating current systems

    • One channel from NAMUR, PNP, NPN, Push-pull, contact
    • Accuracy 0,5%
    • RS485 ModBus RTU Serial Interface
    • Analog output
    • Insulation 2kV 

You may also like…

  • SID72MP8

    Digital indicator for tachometric frequency – dimensions 72×72 – 4 digits with  ALLARMI

    • Accuracy: 0,5%
    • Input:  199,9 rpm…1999 rpm
    • Insulation: 2kV
  • IDC806

    Universal front panel counter

    • One chanel from NAMUR, PNP, NPN, Push-pull, contact, ENCODER
    • Accuracy 0,5%
    • Two RS485 ModBus RTU Serialinterfaces
    • Analog output
    • 4 configurable relays outputs
  • 2ID7XX/XX

    Multiple digital indicator with two displays according to your needs – 72×72

    • Accuracy: 0,2% or 0,5%
    • Inputs: 3 – 3 ½ – 4 cifre
    • Insulation: 2kV