MT-F is a frequency transducer for signals from 45 to 440Hz suitable for alternating current systems, which converts the signal taken from the system into an analog process signal (0 … 5mA – 0..20mA – 4 … 20mA – 0 … 10V etc.) suitable for acquisition by PLC or data management systems. The MT-F transducer is the ideal solution for all types of systems, it’s able to guarantee high insulation (4kV) between input and output and to perform measurements with acquisition times <50 msec (option) and high accuracy class (0.5% or 0.2%) and manages signals up to 500V. It can be supplied with a RS485 ModBus RTU serial interface that allows remote monitoring of all measurement and configuration parameters. When supplied with a serial interface, the transducer can be configured using PrTrasd software with which it is possible to set the input range, output range, perform output tests, etc. The auxiliary power supply allows it to be used both in systems powered by mains voltage and in systems powered at 24Vdc by having an 18…60 Vac/dc extended range power supply on board.

DIN rail frequency transducer for alternating current systems

  • One channel 500V max
  • Accuracy 0,5%
  • RS485 ModBus RTU Serial Interface
  • Analog output
  • Insulation 4kV

 

Data Sheet

User Manual

Catalog

Software

Recommended accessories…

Accessori consigliati

  • CM-MT10

    Terminal covers for transducer series

  • E-CONNECT

    Gateway RS485 ModBus RTU – ModBus ModBus TCP/IP

    • RS485 ModBus RTU Serial interface
    • ModBus TCP/IP on Ethernet
    • Aux. power supply: 18…48Vac/dc

     

  • M1 9648

    IP 54 plumbable splashproof transparent cover – dimensions 96×48

    • Dimensions: 96×48 mm
    • Protection degree: IP54

You may also like…

  • MT-FT

    DIN rail frequency transducer for alternating current systems

    • One channel from NAMUR, PNP, NPN, Push-pull, contact
    • Accuracy 0,5%
    • RS485 ModBus RTU Serial Interface
    • Analog output
    • Insulation 2kV 
  • IDC806

    Universal front panel counter

    • One chanel from NAMUR, PNP, NPN, Push-pull, contact, ENCODER
    • Accuracy 0,5%
    • Two RS485 ModBus RTU Serialinterfaces
    • Analog output
    • 4 configurable relays outputs
  • ID43006

    Digital indicator for frequency – 96×48 – 3 digits

    • Accuracy: 0,2%
    • Input:   9.99Hz … 9.99kHz
    • Insulation: 2kV