M403-M is a DIN RAIL multifunction analyzer suitable for three-phase (3-4 wires or ARON) connection. It’s self-powered (from the measurement signal) and has a current input capable of measuring from 0.05 up to 63 A without the aid of external current transformers. However, it is possible to set CT and VT ratios at will for higher currents and voltages. It is equipped with an LCD display capable of guaranteeing an excellent visualization of the parameters in all needs of use, easy to configure and allows the customization of 9 pages with the needed variables to display, if you want, only what you need . It is equipped with two digital outputs which can be used as alarm or pulse outputs (for energy) and a RS485 ModBus RTU serial interface which allows remote monitoring of all measurement and configuration parameters. M403-M is the ideal instrument for displaying all electric parameters of a three-phase line (voltages, currents, frequency, active – reactive – apparent powers, energies, phase angle, etc.) and in addition to RMS measurements it also provides the fundamental measurements (according to the IEEE 1459-10 standards).

DIN RAIL multifunction meter, three-phase (3 – 4 wires or ARON) connection with RS485 ModBus RTU serial interface

 

  • Three-phase with display
  • Accuracy: 0,2% f.s.
  • RS485 ModBus RTU serial interface
  • Two alarms outputs

 

Data Sheet

User Manual

Catalog

Software

Recommended accessories…

Accessori consigliati

  • E-CONNECT

    Gateway RS485 ModBus RTU – ModBus ModBus TCP/IP

    • RS485 ModBus RTU Serial interface
    • ModBus TCP/IP on Ethernet
    • Aux. power supply: 18…48Vac/dc

     

  • ESK 31.3

    Cable or bus bar current transformer

    • Accuracy: 1% o 0,5%
    • Cable dimension: 26 mm
    • Bus bar dimension: 30 x 10 mm
    • Range: 50 … 400A
  • MT232485

    RS232 – RS485 signal converter

    • RS485 serial Interface
    • RS232 serial interface
    • Aux. power supply: 115/230Vac or 20…60Vac/dc

You may also like…

  • M903-M

    Front panel (96×96 mm) multifunction meter, three-phase (3 – 4 wires or ARON) connection with RS485 ModBus RTU serial interface

     

    • Three-phase with display
    • Accuracy: 0,2% f.s.
    • RS485 ModBus RTU serial interface
    • Two alarms outputs
    • Touch buttons

     

  • M403-BL

    DIN RAIL multifunction meter, three-phase (3- 4 wires or ARON) connection with RS485 ModBus RTU serial interface and ModBus TCP/IP Ethernet interface

    • Three-phase without display
    • Accuracy 0,2% f.s.
    • RS485 ModBus RTU serial interface
    • ModBus TCP/IP on Ethernet
    • Two alarms outputs
  • E2002

    Rear panel network analyzer for three-phase (3-4 wires or ARON) connection

    • Three-phase with display
    • Accuracy 0,5% of f.s.
    • RS485 ModBus RTU Serial interface
    • Two alarms outputs